Whadda WPI408 Camera Module With 2 Ir Lights For Raspberry Pi®

With the Whadda WPI408 you can add a camera to your Raspberry Pi board, but also want night vision to see in the dark, then this module is your solution.

The 2 IR light boards with built-in light sensor can be connected to the central camera module by using the supplied screws.

The IR light will turn on when the built-in sensors detect limited light in the area. Plug-and-play, a tiny size and 5 megapixels to stream in 1080p.

• Embedded removable IR-CUT filter, eliminating colour distortion in the daylight
• Comes with infrared LED that supports night vision
• 4 screw holes to fix the IR lights
• Compatible with all Raspberry Pi Boards
• Sensor: OmniVision OV5647
• Still resolution: 5 megapixels
• Video modes: 1080p @ 30fps - 720p @ 60 fps - 640x480 @ 60/90 fps
• Sensor resolution: 2592 x 1944 pixels
• Sensor image area: 3.76 x 2.74 mm
• Full frame SLR lens equivalent: 35 mm
• Focal length (adjustable): 3.6 mm
• Field of view (FOV): 130 degrees
• Aperture (F): 1.8 mm
• S/N ratio: 36 dB
• Dynamic range: 67 dB @ 8x gain
• Dimensions: 22 x 25 x 15 mm (0.87 x 0.99 x 0.6")
• Weight: 3 g
• IR lights (2): 3.3 V, fits on camera with 2 x 2 screws (included)